Quick start on Debian 11

Suggest edits

Use this quick start to create a highly available demo cluster using EDB Postgres Advanced Server or EDB Postgres Extended Server version 15 on Debian 11. The etcd hosts will be called etcd1, etcd2, and etcd3. The two database nodes in streaming replication are pg-patroni1 and pg-patroni2.

Demo diagram

Etcd

See Installing and configuring etcd to install and set up etcd.

EDB Postgres Advanced or Extended Server

On both pg-patroni1 and pg-patroni2 hosts, install your preferred Postgres flavor. See EDB Postgres Advanced Server or EDB Postgres Extended Server for more information about installing these products using the EDB repository.

The Postgres flavor you choose determines your environment variables.

For EDB Postgres Advanced Server, use the following settings:

export PGPORT=5444
export PGUSER=enterprisedb
export PGGROUP=enterprisedb
export PGDATA="/var/lib/edb-as/15/main"
export PGBIN="/usr/lib/edb-as/15/bin"
export PGSOCKET="/var/run/edb-as"

For EDB Postgres Extended Server, use the following settings:

export PGPORT=5432
export PGUSER=postgres
export PGGROUP=postgres
export PGDATA="/var/lib/edb-pge/15/data"
export PGBIN="/usr/lib/edb-pge/15/bin"
export PGSOCKET="/var/run/edb-pge"

Patroni bootstraps (creates) the initial Postgres cluster and is in charge of starting the service. Make sure systemctl is disabled for this service, and remove the Postgres cluster created during the installation:

$ sudo systemctl stop edb-as@15-main.service
$ sudo systemctl disable edb-as@15-main.service
$ sudo rm -fr /var/lib/edb-as/15/main

or

$ sudo systemctl stop edb-pge-15.service
$ sudo systemctl disable edb-pge-15.service
$ sudo rm -fr /var/lib/edb-pge/15/data

Watchdog

Patroni is the component interacting with the watchdog device. Set the permissions of the software watchdog on both pg-patroni1 and pg-patroni2 hosts:

$ cat <<EOF | sudo tee /etc/udev/rules.d/99-watchdog.rules
KERNEL=="watchdog", OWNER="$PGUSER", GROUP="$PGGROUP"
EOF
$ sudo sh -c 'echo "softdog" >> /etc/modules-load.d/softdog.conf'
$ sudo modprobe softdog
$ sudo chown $PGUSER:$PGGROUP /dev/watchdog

Patroni

On both pg-patroni1 and pg-patroni2 hosts, install Patroni and its dependencies for etcd. See Installing Patroni.

Define the Patroni configuration in /etc/patroni.yml:

$ CLUSTER_NAME="demo-cluster-1"
$ MY_NAME=$(hostname --short)
$ MY_IP=$(hostname -I | awk ' {print $1}')
$ cat <<EOF | sudo tee /etc/patroni.yml
scope: $CLUSTER_NAME
namespace: /db/
name: $MY_NAME

restapi:
  listen: "0.0.0.0:8008"
  connect_address: "$MY_IP:8008"
  authentication:
    username: patroni
    password: mySupeSecretPassword

etcd3:
    hosts:
    - etcd1:2379
    - etcd2:2379
    - etcd3:2379

bootstrap:
  dcs:
    ttl: 30
    loop_wait: 10
    retry_timeout: 10
    maximum_lag_on_failover: 1048576
    postgresql:
      use_pg_rewind: true
      use_slots: true
      parameters:
        archive_mode: "on"
        archive_command: "/bin/true"

  initdb:
  - encoding: UTF8
  - data-checksums
  - auth-local: peer
  - auth-host: scram-sha-256

  pg_hba:
  - host replication replicator 0.0.0.0/0 scram-sha-256
  - host all all 0.0.0.0/0 scram-sha-256

  # Some additional users which needs to be created after initializing new cluster
  users:
    admin:
      password: admin%
      options:
        - createrole
        - createdb

postgresql:
  listen: "0.0.0.0:$PGPORT"
  connect_address: "$MY_IP:$PGPORT"
  data_dir: $PGDATA
  bin_dir: $PGBIN
  pgpass: /tmp/pgpass0
  authentication:
    replication:
      username: replicator
      password: confidential
    superuser:
      username: $PGUSER
      password: my-super-password
    rewind:
      username: rewind_user
      password: rewind_password
  parameters:
    unix_socket_directories: "$PGSOCKET,/tmp"

watchdog:
  mode: required
  device: /dev/watchdog
  safety_margin: 5

tags:
  nofailover: false
  noloadbalance: false
  clonefrom: false
  nosync: false
EOF
Note

In the postgresql: authentication: section in the example, a superuser is created during initialization (initdb) and later used by Patroni to connect to the database. The replication user is created and used by the standby servers to access the replication source by way of streaming replication. Finally, a rewind user is created and is used with pg_rewind when needed. We then recommend changing those passwords in the example configuration to match your password policy.

$MY_IP and $MY_NAME are specific to the local host. Otherwise, the patroni.yml configuration is the same on all Patroni nodes.

Patroni expects to find the postgres binary in the bin_dir location, while the EDB Postgres Advanced Server binary is called edb-postgres. Create a symbolic link to let Patroni find that binary:

$ sudo ln -s /usr/lib/edb-as/15/bin/edb-postgres /usr/lib/edb-as/15/bin/postgres

Depending on the Patroni installation source, a systemd file might already have been created. Define your own file with the accurate system user, group, and configuration path:

$ cat <<EOF | sudo tee /etc/systemd/system/patroni.service
[Unit]
Description=Runners to orchestrate a high-availability Postgres
After=syslog.target network.target

[Service]
Type=simple
User=$PGUSER
Group=$PGGROUP
EnvironmentFile=-/etc/patroni_env.conf
ExecStart=patroni /etc/patroni.yml
ExecReload=/bin/kill -s HUP \$MAINPID
KillMode=process
TimeoutSec=30
Restart=no

[Install]
WantedBy=multi-user.target
EOF

$ sudo systemctl daemon-reload
$ sudo systemctl enable patroni
$ sudo systemctl start patroni

Start the Patroni service first on pg-patroni1 so it becomes the leader of your Postgres cluster, and then start pg-patroni2.

To list the members of the cluster, use the patronictl command:

$ patronictl -c /etc/patroni.yml list
+ Cluster: demo-cluster-1 (7104275668989116902) ----+----+-----------+
| Member      | Host            | Role    | State   | TL | Lag in MB |
+-------------+-----------------+---------+---------+----+-----------+
| pg-patroni1 | 192.168.121.61  | Leader  | running |  1 |           |
| pg-patroni2 | 192.168.121.135 | Replica | running |  1 |         0 |
+-------------+-----------------+---------+---------+----+-----------+

The Patroni REST API is available on port 8008.

With EDB Postgres Advanced Server, after the database cluster is running, some other systemd dependencies might need a reset. Use the following commands to perform the resets:

$ sudo systemctl restart edb-as15-pgagent.service
$ sudo systemctl reset-failed

HAProxy

For the purpose of this example, install HAProxy on both pg-patroni1 and pg-patroni2 hosts:

$ sudo apt-get install -y haproxy
$ sudo systemctl stop haproxy
$ sudo cp /etc/haproxy/haproxy.cfg /etc/haproxy/haproxy.cfg.bck
$ cat <<EOF | sudo tee /etc/haproxy/haproxy.cfg
global
    maxconn 100

defaults
    log    global
    mode    tcp
    retries 2
    timeout client 30m
    timeout connect 4s
    timeout server 30m
    timeout check 5s

listen stats
    mode http
    bind *:7000
    stats enable
    stats uri /

listen read-write
    bind *:5000
    option httpchk OPTIONS /read-write
    http-check expect status 200
    default-server inter 3s fall 3 rise 2 on-marked-down shutdown-sessions
    server pg-patroni1 pg-patroni1:$PGPORT maxconn 100 check port 8008
    server pg-patroni2 pg-patroni2:$PGPORT maxconn 100 check port 8008

listen read-only
    balance roundrobin
    bind *:5001
    option httpchk OPTIONS /replica
    http-check expect status 200
    default-server inter 3s fall 3 rise 2 on-marked-down shutdown-sessions
    server pg-patroni1 pg-patroni1:$PGPORT maxconn 100 check port 8008
    server pg-patroni2 pg-patroni2:$PGPORT maxconn 100 check port 8008
EOF

$ sudo systemctl enable haproxy
$ sudo systemctl start haproxy

There are two sections: read-write, using port 5000, and read-only, using port 5001. All Postgres hosts are included in both sections because they are all potential candidates to be either primary or standby. For HAProxy to know the role each host currently has, it queries the Patroni REST API:

$ curl -s http://pg-patroni1:8008
{
  "state": "running",
  "postmaster_start_time": "2022-06-30 07:45:55.427895+00:00",
  "role": "master",
  "server_version": 140400,
  "xlog": {
    "location": 67108960
  },
  "timeline": 1,
  "replication": [
    {
      "usename": "replicator",
      "application_name": "pg-patroni2",
      "client_addr": "192.168.121.229",
      "state": "streaming",
      "sync_state": "async",
      "sync_priority": 0
    }
  ],
  "dcs_last_seen": 1656575356,
  "database_system_identifier": "7114936110138668110",
  "patroni": {
    "version": "2.1.3",
    "scope": "demo-cluster-1"
  }
}
Note

By using the /replica endpoint, Patroni redirects only to a standby server. Use /read-only to also include the primary.

You can now use port 5000 and port 5001 to choose between read-write or read-only connections:

$ psql -U admin -d postgres -h pg-patroni1 -p 5000 -c "SELECT pg_is_in_recovery();"
 pg_is_in_recovery
-------------------
 f
(1 row)

$ psql -U admin -d postgres -h pg-patroni1 -p 5001 -c "SELECT pg_is_in_recovery();"
 pg_is_in_recovery
-------------------
 t
(1 row)

Could this page be better? Report a problem or suggest an addition!